Crack n Software

Make your Pendrive or USB Stick bootable drive for any OS

Steps:

1. Attache your Pendrive or USB Stick and FORMAT as FAT32.

2. Download Universal USB Installer

3. Run it and click on Agree.

4. Select your OS from DropDown List that you want to make bootable USB.

5. Browse your OS ISO file from your System. (Note: For this you must have ISO extension file only.)

6. Select your USB or Pendrive Letter very carefully.

7. Click on Create, Process will be start, Wait for while untill it finish.

Now your ready to install your OS from USB or Pendrive...

Update Galaxy S2 I9100 To Android 4.4.2 KitKat via Omni ROM

Warning!

This tutorial is only for Galaxy S2 I9100. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Galaxy S2 I9100 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy S2 I9100. [Guide].

5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.1 and up installed. [Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.2 KitKat based OmniROM on Galaxy S2 I9100.

File Required(Download by clicking on it)

1. Omni Android 4.4.2 KitKat ROM For Galaxy S2 I9100 [Filename: omni-4.4.2-20131215-i9100-NIGHTLY.zip]
2. Google Apps [Filename: gapps-kk-20131119.zip]

How to Install Android 4.4.2 KitKat based Omni ROM on Galaxy S2 I9100

1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
2. Disconnect USB and then turn off your Galaxy S2 I9100.
3. Now, boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power or Home Key to select an option. Alternatively try this: Recovery Mode without Key Combination.
4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the OmniROM Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
7. Once the ROM installation process end, repeat the step 6 but choose the gapps-kk-20131119.zip file instead of ROM zip to install the Google apps package.
8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Galaxy S2 I9100 and boot up into rooted Android 4.4.2 KitKat ROM Omni. 
9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Congrats! Android 4.4.2 KitKat firmware based custom ROM Omni is now installed and running on your Galaxy S2 I9100.

Windows 8.1 Activator

Steps:

Download Activator
1. Install
2. Run As Administrator to work
3. Click Uninstall Product Key
4. Click "Update Server" to Update KMS Server
5. Click on which version of Windows you
   Done, Enjoy

Make your file PDF with Password Protected

Steps:

1. Download novaPDF

2. Install it.

Now...

To password protect PDF documents with novaPDF Professional.

• Open the document that you want to convert to PDF and password protect. Go to File->Print and in the Printers section select novaPDF Pro.
• After novaPDF Pro is selected click on the Properties button (or Preferences) to open thenovaPDF Pro Properties window.
• Go to the Security tab and select either the Low Level or High Level Encryption method. You can setup a password for opening and/or modifying the PDF document by entering and confirming it in theUser Password field (Owner Password lets you require a password when changing the security features of the PDF, not when opening it).
• Press OK to save the printing preferences for novaPDF Pro and in the Print window of the program click OK to so that the creation of the PDF files starts (the PDF file will be displayed after it's created). Note that the password protection will be applied to further created PDF files too unless you deselect the PDF password protect options from the Security tab.

User password is for opening (and reading) the PDF file. If you define an user password before generating the PDF file, when someone will want to open the resulting PDF file it will have to enter the user password to open it. So only the ones that know this password can read/open the password protected PDF file.

Owner password is set for changing the rights of the PDF file. The owner password is not requested when opening the PDF file but it is requesting when you want to change something in the password protected PDF file that was restricted from modifying. 

Examples of using High Level Encryption to restrict PDF permissions:

• If you want to disallow content copying from the PDF, you should make sure that the Extract text and Graphics and Advanced extract text and graphics options are unchecked. If these options are unchecked, when someone will try to copy text from the PDF to paste it elsewhere, it will not work.
• If you want to disallow readers to print the password protected PDF document, you can do so by unchecking the Print Document option in the Document Permissions section. Additionally, you can allow printing only in low resolution (150 dpi), by checking the Print Document option but unchecking the Print high resolution one (allowing only low resolution printing also prevents users from using optical character recognition software to create a similar document).
• If you want to disallow form filling, make sure the following options are unchecked: Modify Annotations, fill forms and Advanced form filling.

• 

You can set additional document restrictions, and by default, when either Low Level encryption or High Level Encryption is selected, all the restrictions applicable for those options will be enforced.

The Low Level encryption method allows you to restrict access so that the user opening the password protected PDF will not be able to: Print document, Modify document content, Extract text and graphics,Modify annotations, Fill forms (the checkboxes beside these options are not checked by default, if you want to allow one of these options you'll have to check the option).

The High Level Encryption method, beside the restrictions of the Low Level Encryption method, allows you to restrict access so that the user opening the password protected PDF will not be able to Print high resolution, Assemble the document, Advanced extract text and graphics, Advanced fill forms.

Note that when using any of the two types of encryption that novaPDF supports, the resulting PDF files will have their contents encrypted (even if you don't set a password, but only select an encryption option) so search engines won't be able to index the contents of the PDF files (nor their metadata description). You can check to see if your PDF has the content encrypted in Adobe Reader, by pressing Ctrl+D and clicking on the Securitytab. If the content is encrypted, you should see the following text under the Document Security section: All contents of the document are encrypted and search engines cannot access the document's metadata.

Norton 360 v20.4.0.40 Activator

Steps:

1. Download Activator
2. Now start / restart your system in safe mode. (for windows 8 - Hold Shift key and click on restart).
3. Now in safe mode go to downloaded file activator and run it.
4. Follow the instruction which will be displayed in cmd box after run it. (if you don't know anything then just run it and press 'a' and again press 'b')
5. After pressing key wait for moment your system will restart automatically.
6. Now open in normal mode and Enjoy buddy for 60 days.
7. When is going to finish then again repeat these steps to convert into 60 day... :)

Make your Pendrive or USB Bootable for Windows

Steps:

1. Download Bootable USB maker for Windows
2. Run it.
3. Choose OS system for which you want to Install OS by Pendrive or USB.
4. Give your desire name in Label.
5. Choose ISO or Image file in Setup Location for which you want it install OS into USB or Pendrive.
6. Set your Pendrive or USB destination/Path.
7. Hit Go and wait for minutes.
8. Your ready to it. Enjoy...

Partition Wizard

Steps:

1. Download Partition Wizard.
2. Install it and do want you want to do with your Partition.
ENJOY :-)

Crack for Photoshop CS 6 (Patch File)

Steps:

1.Download Patch File
2. Before run it, make sure your Internet, anti-virus system is temporary disable if it is not then disable it for few min And close Photoshop application.
3. Now Run the file and click on Patch button it automatically cracks the Photoshop. If it fail to patch then give Location: C:\Program Files\Adobe\Adobe Photoshop CS6 and select "Photoshop.exe".
4. Finish now enjoy !

Make your Laptop Hotspot - Wifi

Steps :

1.Click here to Download Hotspot tool.
2. Install it as a Admin (By right clicking on setup).
3. Launch it as a Admin (By right clicking on launcher) and select Automatic hotspot configuration. (Before launch it you must connected with internet via wifi or dongle.)
4. Click on Set up and Start hotspot.
Enjoy :-)

Bootable Pendrive (USB) Maker for any Linux

Steps:

1. Download Boot-able Disk Maker Tool 
2. Run it.
3.Click on Disk image Radio button.
4.Browse path to .ISO file.
5.Select Type of Disk and Drive.
6.Click Okay.
7.Now restart your system to boot.
8.Enjoy!

Internet Download Manager Full License Version!

Steps : 

Download IDM

File Host Crack IDM all version

1. Fix Host : C:\Windows\System32\drivers\etc

Copy File Host to Desktop, open by Notepad

205.199.44.156 registeridm.com
205.199.44.16 registeridm.com
127.0.0.1 www.internetdownloadmanager.com

Close and Save

2. Registration : IDM SERIAL NUMBER

NTOQN-7HUL9-NEPFL-13I0A
629U7-XLT5H-6SCGJ-2CENZ
XONF7-PMUOL-HU7P4-D1QQX
F9TZ9-P6IGF-SME74-2WP21
CJA0S-K6CO4-R4NPJ-EKNRK
N0Z90-KJTTW-7TZO4-I27A1
4DFQ4-OAPFS-L50GF-3GWRJ
4DFQ4-OAPFS-L50GF-3GWRJ
L67GT-CE6TR-DFT1D-XWVCM

Fist Name : BlogIDM
Last Name: www.maythietbimo.net
Email : maythietbimo54@gmail.com

ENJOY :-)

Windows 7 Genuine Remover

Download Windows 7 RemoveWAT

Steps
1. Just run it and click on button.
2. Wait for system restart automatically.
3. Enjoy your windows 7 Genuine free. 

Activator of Windows 8

Download Windows 8 Activator

Steps:

1.Disconnect your internet connection before installing it.

2.Double Click on KMSnano_10_TheWiz.exe.

3.Password - TheWiz.

4.Click on install.

5.If - Ask for Yes and No then Click on Yes.

6.Press RED Button but before it check that Windows option must be checked.

7.Now wait for some few minutes.

8.After finishing it, it'll ask you for press key to continue in purple box.

9.Restart your system.

10.Enjoy your fully Activated windows 8.